Select Page

QS-800 Collision Sensor

qs800_corner_122008newThe QS-800 is a dynamically variable collision sensor that operates on an air pressure system – and provides excellent protection in machine load/unload robotics applications.

A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.

Key Benefits

  • Dynamically variable trip points
  • Permanent repeatability
  • Detects angular, rotational and compressive forces
jumpdown Additional Product Info

Engineering Data

Performance Metric Imperial
Torque Trip Point 53-255 N-m 427-2250 in-lb
Moment Trip Point 36-158 N-m 292-1400 in-lb
Mass 3.72 kg 8.2 lb
Diameter 167 mm 6.57 in
Profile 81.5 mm 3.2 in
Compliance Angle ±5°
Axial Compliance (Z+) 9.3 mm 0.366 in
Rotary Compliance ±25°
Center of Mass 46.8 mm 1.84 in
Operating Temperature 0°C min – 100°C max
Repeatability X&Y: ±0.025 mm
Z: ±0.013 mm
Rotational: ±0.029°
Avg. Response Time 4-8 ms
Switch High reliability aircraft snap acting type. Rated 3 amps,
Average cycle life – 7 million cycles
Dust Protection Foam collar supplied
Options Coolant Resistant Boot
Hi-Temp Skirt Kit
Voltage & Current Rating 28Vdc max, 200mA max

Additional Product Info

3dModeling Tool
pdfDatasheet (QS-800 (Mechanical))
QS Users Guide pdfUser Guide
Don’t see what you’re looking for? Contact
adaptorsProduct Adaptor Plates
linkRelated Disk Drive Solution