Select Page

QS-200 Collision Sensor

qs200_corner_122008newThe QS-200 is a dynamically variable collision sensor that operates on an air pressure system.

A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.

Key Benefits

  • Dynamically variable trip points
  • Permanent repeatability
  • Use on linear actuators, robots, pick-and-place machines
  • Detects angular, rotational and compressive forces
jumpdown Additional Product Info

Engineering Data

Performance Metric Imperial
Torque Trip Point 7.5-45.2 N-m 66-400 in-lb
Moment Trip Point 5.9-32.4 N-m 52-287 in-lb
Mass 0.68 kg 1.5 lb
Diameter 97 mm 3.8 in
Profile 43.5 mm 1.71 in
Compliance Angle ±5°
Axial Compliance (Z+) 5.2 mm 0.205 in
Rotary Compliance no limit
Center of Mass 25.7 mm 1.01 in
Operating Temperature 0°C min – 70°C max
Repeatability X&Y: ±0.025 mm
Z: ±0.013 mm
Rotational: ±0.024°
Avg. Response Time 4-7 ms
Switch High reliability aircraft snap acting type. Rated 3 amps,
Average cycle life – 7 million cycles
Dust Protection Foam collar supplied
Options Coolant Resistant Boot
Hi-Temp Skirt Kit
Voltage & Current Rating 28Vdc max, 200mA max

Additional Product Info

3dModeling Tool
pdfDatasheet (QS-200 (Mechanical))
QS Users Guide pdfUser Guide
Don’t see what you’re looking for? Contact
adaptorsProduct Adaptor Plates
linkRelated Disk Drive Solution