QS-1500 Collision Sensor

qs1500_corner_122008newThe QS-1500 is a dynamically variable collision sensor that operates on an air pressure system – and provides excellent protection in machine load/unload robotics applications.

A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.

Key Benefits:

  • Dynamically variable trip points
  • Permanent repeatability
  • Detects angular, rotational and compressive forces
jumpdown Additional Product Info

Engineering Data

Performance Metric Imperial
Torque Trip Point 87-371 N-m 784-3284 in-lb
Moment Trip Point 82-291 N-m 727-2573 in-lb
Mass 5.5 kg 12 lb
Diameter 193 mm 7.59 in
Profile 95 mm 3.74 in
Compliance Angle ±5°
Axial Compliance (Z+) 10.8 mm 0.425 in
Rotary Compliance ±25°
Center of Mass 54.6 mm 2.15 in
Operating Temperature 0°C min – 100°C max
Repeatability X&Y: ±0.038 mm
Z: ±0.013 mm
Rotational: ±0.029°
Avg. Response Time 4-18 ms
Switch High reliability aircraft snap acting type. Rated 3 amps,
Average cycle life – 7 million cycles
Dust Protection Foam collar supplied
Options Coolant Resistant Boot
Hi-Temp Skirt Kit
Voltage & Current Rating 28Vdc max, 200mA max

qs1500_inlineAdditional Product Info

3dModeling Tool
pdfDatasheet (QS-1500 (Mechanical))
QS Users Guide pdfUser Guide
Don’t see what you’re looking for? Contact engineering@appliedrobotics.com.
adaptorsProduct Adaptor Plates