MAV

Self-centering vice with manual drive

MAV

Mechanical self-centering MAV vices are widely used on working machine to clamp the work pieces.
The thrust to obtein the clamping force on the piece is determinate through a torque on the lead screw.
They are suitable to be apply with milling machine or tool machine with a pneumatic or oil-hydraulic feeding’s availability.

ADVANTAGES

• High sliding run of grippers
• Self-centering system
• The thrust is directly from lead screw to gripper.
• The load screw is made with an acme thread to blocking work pieces also in open side. Screw is supported by a bearing into an a central “box”.
• The final centering adjustments are made after assembly, with vice feeding with a torque on the lead screw.
• All the pieces are made with extreme precision to assure centesimal allwance in construction.
• The flat jaw guides have inserted gib for the sliding surfaces and so as to regain slack resulting from wear.
In the serial construction the predisposition for pressurization is not included, because the mechanic closing sistem has usually a pneumatic feeding.

ModelStroke per jaw

mm (in)
Closing force
per jaw
@ max pressure

N (lb)
Total closing
force
@ max pressure

N (lb)
Max. closing
torque

Nm (in-lb)
Repeat
accuracy

mm (in)
Weight

Kg (lbs)
 
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.
MAV 17020
(0.79)
9000
(2023.38)
18000
(4046.76)
60
(531.04)
±0.01
(±0.0004)
10
(22.05)
MAV 19525
(0.98)
15000
(3372.30)
30000
(6744.60)
100
(885.07)
±0.01
(±0.0004)
16
(35.27)
MAV 25030
(1.18)
15000
(3372.30)
30000
(6744.60)
100
(885.07)
±0.01
(±0.0004)
20
(44.09)
MAV 27540
(1.57)
20000
(4496.40)
40000
(8992.80)
134
(1186.00)
±0.01
(±0.0004)
30
(66.14)
MAV 32545
(1.77)
20000
(4496.40)
40000
(8992.80)
134
(1186.00)
±0.01
(±0.0004)
42
(92.59)

Ambient temperature 5-60°C