M – 2 jaws

M – 2 jaws

Self-centering vise with lever mechanism and pneumatic or hydraulic drive – 2 jaws

M

The M vice is normally used on special machines for chip removal, in order to lock the workpiece with absolute precision during the working phase.
This vice is also used in assembly systems.

ADVANTAGES

In order to have perfect interchangeability of the vice on the machine, and item gripper jaws, we carry out the final rectification of centering and height with the assembled vice and with pressure at the same bar required by the customer. This also allows to better simulate the real working conditions.
The vice provides also systems for scraping and trimming to prevent or minimize the intrusion of extraneous bodies. For particularly difficult material working, it can be realized a forced pressurized system to avoid the entry of the dirt through the center or side plate.

ModelStroke
per jaw

mm (in)
Closing force
per jaw
@ max pressure

N (lb)
Total
closing force
@ max pressure

N (lb)
Pressure

bar (psi)
Repeat
accuracy

mm (in)
Fluid consumption
double stroke

cm³ (in³)
Weight

Kg (lbs)
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.
M 522.5
(0.10)
335.5
(75.43)
671
(150.85)
6-9
(87-130)
±0.01
(±0.0004)
8
(0.49)
0.6
(1.32)
M 855
(0.20)
1658.25
(372.81)
3316.5
(745.62)
6-12
(87-174)
±0.01
(±0.0004)
53
(3.23)
2
(4.41)
M 1106
(0.24)
2503.05
(562.74)
5006.1
(1125.47)
6-12
(87-174)
±0.01
(±0.0004)
109
(6.65)
4.5
(9.92)
M 1408
(0.31)
6436.65
(1447.09)
12873.3
(2894.18)
6-20
(87-290)
±0.01
(±0.0004)
225
(13.73)
9
(19.84)
M 1709
(0.35)
11114.4
(2498.74)
22228.8
(4997.48)
6-20
(87-290)
±0.01
(±0.0004)
393
(23.98)
17
(37.48)

Ambient temperature 5-60°C
Sound emissions (sound pressure) ≤ 70 db (A) in each direction