FLEXICUT

FLEXICUT

Milling tool – compliance radial

The milling tool FLEXICUT 100 can be used for the economical deburring of small and complex parts of metallic as well as nonmetallic material. The spindle is freely compliable in all directions. The pressure against the part edge can be set from the robot program.

Datasheet	.............Model.............	Power W	Idling speed rpm	Compliance radial in all directions mm (in)	Compliance torque @ 6 bar Nm (in-lb)	Compliance force @ 6 bar N (lb)	Feed forward rate mm/s (in/s)	Fluid consumption l/sec	Collet mm (in)	Weight Kg (lbs)
	FLEXICUT 100	100	85000	±2.5°/±5 (±2.5°/±0.20)	0.4 (3.54)	3.5 (0.79)	5 - 200 (0.20 - 7.87)	2.8	Ø3 (Ø0.12)	1.76 (3.88)
	FLEXICUT 250	240	35000	±4.2°/±8 (±4.2°/±0.31)	1.04 (9.20)	8 (1.80)	5 - 250 (0.20 - 9.84)	7.5	Ø6 (Ø0.24)	2.6 (5.73)
	FLEXICUT 1000	1000	25000	±3.5°/±13 (±3.5°/±0.51)	10 (88.51)	60 (13.49)	10 - 300 (0.39 - 11.81)	26	Ø8 (Ø0.31)	12 (26.45)
	FLEXICUT 1020	1000	25000	±3.2°/±16 (±3.2°/±0.63)	/	109 (24.50)	10 - 300 (0.39 - 11.81)	26	Ø8 (Ø0.31)	7.3 (16.09)
	FLEXICUT 1040	1300	25000	±5°/±22 (±5°/±0.87)	71 (628.40)	250 (56.20)	10 - 300 (0.39 - 11.81)	26	Ø8 (Ø0.31)	18 (39.68)
	FLEXICUT 350	300	35000	± 4.2°/±8 (± 4.2°/±0.31)	1.04 (9.20)	8 (1.80)	5 - 250 (0.20 - 9.84)	/	Ø6 (Ø0.24)	2.6 (5.73)
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.