Contact us on +1 518 384 1000 or info@appliedrobotics.com
CHISEL

Chipping hammer – compliance pendulous

CHISEL

The chipping hammer CHISEL 4380 is well suited to remove burrs and flashes of mould parting lines particularly in openings, slots and grooves. It is well suited for the deflashing of parts made of gray cast iron- and aluminium-casting. It can be employed in any orientation. The chisel tip is compliable in two directions. The pressure against the part can be set from the robot program.

Datasheet.............Model.............Strokes
per min
Energy
per blow

J
Compliance
in two directions
(pendulous)

mm (in)
Compliance torque
@ 6 bar

Nm (in-lb)
Compliance force
@ 6 bar
N (lb)
Feed forward rate

mm/s (in/s)
Fluid consumption

l/s
Chisel mounting

mm (in)
Weight
CHISEL 438043801.4± 3.8° / ± 17
at chisel
(± 3.8° / ± 0.67
at chisel)
16.6
(146.92)
62 at chisel
(13.94 at chisel)
5 - 150
(0.20 - 6.30)
4Square shaft 13
(Square shaft 0.52)
7.4
(16.31)
The dimensions are indicative and susceptible to changes due to technical improvements. We reserve the right to make changes without notice.

APPLICATION VIDEO

CHISEL 4380