Select Page

QS-50 Collision Sensor

qs50_corner_122008newThe QS-50 is a dynamically variable collision sensor that operates on an air pressure system.

A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.

Key Benefits

  • Dynamically variable trip points
  • Permanent repeatability
  • Use on linear actuators, robots, pick-and-place machines
  • Detects angular, rotational and compressive forces
jumpdown Additional Product Info

 

Engineering Data

Performance Metric Imperial
Torque Trip Point 2.2-14.0 N-m 19-124 in-lb
Moment Trip Point 2.6-11.8 N-m 23-104 in-lb
Mass 0.29 kg 0.65 lb
Diameter 71 mm 2.79 in
Profile 35 mm 1.37 in
Compliance Angle ±5°
Axial Compliance (Z+) 4.3 mm 0.169 in
Rotary Compliance no limit
Center of Mass 20.3 mm .80 in
Operating Temperature 0°C min – 70°C max
Repeatability X&Y: ±0.025 mm
Z: ±0.013 mm
Rotational: ±0.024°
Avg. Response Time 2-6 ms
Switch High reliability aircraft snap acting type. Rated 3 amps,
Average cycle life – 7 million cycles
Dust Protection Foam collar supplied
Options Coolant Resistant Boot
Voltage & Current Rating 28Vdc max, 200mA max

Additional Product Info

3d Modeling Tool 
pdf Datasheet (QS-50 (Mechanical))
pdf User Guide 
Don’t see what you’re looking for? Contact engineering@appliedrobotics.com.
Accessories
adaptors Product Adaptor Plates
cables Cabling
Links
link Related Disk Drive Solution