Select Page

QS-3000 Collision Sensor

qs3000_corner_122008newThe QS-3000 is a dynamically variable collision sensor that operates on an air pressure system.

A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.

Key Benefits

  • Dynamically variable trip points
  • Permanent repeatability
  • Detects angular, rotational and compressive forces
jumpdown Additional Product Info

Engineering Data

Performance Metric Imperial
Torque Trip Point 153-478 N-m 1353-4232 in-lb
Moment Trip Point 105-414 N-m 924-3664 in-lb
Mass 12.2 kg 27 in
Diameter 260 mm 10.23 in
Profile 115 mm 4.53 in
Compliance Angle ±5°
Axial Compliance (Z+) 14.3 mm 0.563 in
Rotary Compliance ±25°
Center of Mass 66 mm 2.60 in
Operating Temperature 0°C min – 100°C max
Repeatability X&Y: ±0.038 mm
Z: ±0.013 mm
Rotational: ±0.029°
Avg. Response Time 4-18 ms
Switch High reliability aircraft snap acting type. Rated 3 amps,
Average cycle life – 7 million cycles
Dust Protection Foam collar supplied
Options Coolant Resistant Boot
Hi-Temp Skirt Kit
Voltage & Current Rating 28Vdc max, 200mA max

Additional Product Info

3dModeling Tool
pdfDatasheet (QS-3000 (Mechanical))
QS Users Guide pdfUser Guide
Don’t see what you’re looking for? Contact engineering@appliedrobotics.com.
Accessories
adaptorsProduct Adaptor Plates
cablesCabling